Tag Archives: SMD

Really Small(s) GPS

Posted on by

Hi peeps, I have been wanting to make a small GPS device (GPS receiver and some sort of screen) that I could carry around for a while now, but I didn’t want it to be too big, so I made this. Mission accomplished.

This unit is explained in the video above, but is basically a GPS receiver, 1 CR1220 battery for the RTC on the GPS breakout, one of my Square Inch of Goodness boards, one 128×32 OLED display, three 6mm buttons, and a 400mAh Li-Po Battery (from Sparkfun). It even has FTDI headers on it so I can update the firmware with ease (with my own FTDI adapter!). The awesome part is that all of those things fit in an Altoids Smalls tin, measuring 2.15″ (W), 1.35″ (L), and .56″ (H), or 55mm (W), 34mm (L), and 14mm (H).

The GPS breakout board is from Adafruit and uses the MTK3339 GPS module, and man does it work well. I have had other GPS modules that worked, but it was a fight. If you’re thinking about putting GPS in a project, use this. They also have a great library for it. They even have the raw MTK3339 GPS module if you want to use your board. Read the Adafruit product page for all the features, there are many.

The 128×32 OLED display is also from Adafruit, it works well and has the typical OLED crispiness. Very easy to read, even in sunlight, for the size and you can even multiply the text size if you want to.

So I’m going up to NY in a few days, and I wanted a new and exciting way to talk with the TSA folks, so I figured this would work. (kidding) If only Hollywood had not trained everyone to think a gadget with a few wires and a flashing red LED, that they didn’t understand, was a bomb.. ugh. (not kidding)

*UPDATE – there is a set on Flickr for this with teardown pictures.

*UPDATE #2 – Oops, I forgot to put the link to the code on Github. 0_0

Homemade Flux Remover

Posted on by

I was inspired by a video by Jeri Ellsworth that showed her using homemade flux remover. This is super simple a combo of alcohol and acetone. In this video, I use a 50/50 combo of the two. So that’s 32 oz. of flux remover for $3. I Googled flux remover and it ranges from $10 to $25 for 12 oz. So that a savings of at least about $70. I have been using this on about every board I can find and it has worked great on all of them. I heart saving money. 🙂

One Square Inch of Goodness

Posted on by

So a while ago I discovered that I needed a microcontroller in a really tight space. I tried an ATmega328P PU (DIP package), but try as I may, It would not fit. The answer? The ATmega328P AU (TQFP) this is a much smaller package, and for an added bonus, it has 2 extra ADC’s. This a great little board to squeeze in various projects, and opens the door to some very cool stuff I have coming up. Some of you might remember I put this board in a project I did a while ago when space was very limited. It’s just a handy little board to have on hand. 🙂

In the video above, I show some soldering with TQFP packages, as well as a little soldering with hot air. I need to figure out a way to record video from my brain. It would make things so much easier..

Oh, I almost forgot, the flux pen I used, found at Sparkfun.

The Eagle files for this board are on my Github page. Or just the schematic PDF.

SMD Soldering – You can do it!

Posted on by

Here is a video on SMD (Surface Mount Device) soldering. In this video I show how to solder some SMD components on to a little board with an ATtiny85V, switch, LED, and resistor. The short version of this video just shows the resistor and LED (size 603) being soldered, the long version of this video shows everything being soldered. It’s really neat to open up the world of SMD. You can make really tiny (and cheap!) widgets! Continue reading →

Yamaha AG Stomp Mod

Posted on by

I wanted to do a quick post on a mod I did to a Yamaha AG Stomp. An AG Stomp is a acoustic guitar effects pedal that was made in 1994, but no longer available.

The need was this: to gain more real estate space under a keyboard that was full of pedals, controllers, and switches. So the need to switch banks without taking up the whole size of the pedal was the goal. The answer was to build a small (3.64″L x 1.52″W x 1.22″D) pedal that had a single switch, had an easy way to tell witch bank you were on, have a signal indicator, and be road tough. The end result made the customer very happy, and he requested that I share, so here it is. 🙂

You can check out Austin Biel at austinbiel.com, an awesome musician (including the best keyboard player I have heard), and an outstanding friend.